The correct way to open the metal carved board
Although metal carved panels have many excellent features and performances, if they are not properly stored, transported and installed, the use effect will be affected. Therefore, only by correctly "opening" the engraved board can it better play its own function and effect.
1. When unpacking, do not take out the metal engraved board from the unsealed side to avoid scratching the board surface. After the carved board is cut, the cutting iron chips will adhere to the board surface and the incision, which is easy to rust. The remaining iron filings should be removed.
2. When handling carved panels and loading and unloading carved panels, the length direction of the panel should be used as the stress surface, and it should be handled with care to avoid collision damage; when handling a single sheet of paper, the paper should be upright to avoid paper deformation.
3. Pay attention to protect the carved board surface during construction to avoid scratches and impacts. Avoid construction work when it rains; during the construction process, the interior of the carved board should be prevented from contacting with water to prevent the internal moisture from seeping out of the surface, causing the board surface to corrode and rust, thereby shortening its service life. Avoid using in places with high temperature, high humidity and acidic substances (such as boiler rooms, combustion chambers, hot springs, paper mills, etc.)
4. For the railings protruding from the wall, air-conditioning through-wall pipes, condensate pipes, etc. , The corresponding size should be reserved before the panel is installed, and it is not necessary to open the construction after the panel is installed. If there are supporting members for air conditioners, air outlets and other facilities on the wall, welding and other processes should be carried out before the wall panels and insulation materials are laid.
5. The bottom of the transport vehicle needs to be flat. After horizontal loading, the engraving plate should be fixed to avoid product damage caused by excessive binding of the engraving plate. Reduce vibration during transportation, prevent collision and rain. The environment where the metal carved panels are placed should be ventilated and dry, and the site should be flat and solid.
6. When using square wooden mats, it should be ensured that the metal carved board will not be deformed; when placed in the open air, the carved board should be completely covered with a waterproof cloth; when storing the carved board, it should be kept away from high temperature and high humidity areas, and must not be corroded by oil, chemicals, etc. Mixed sexual substances. When opening the engraved board package, it should be laid flat first, then open from the top of the product package, and take out the board from top to bottom.
Therefore, when buying and installing metal carved panels, be sure to follow these correct "opening" methods mentioned by Bian Xiao, because this will make your carved panels work better and stronger. At the same time, after long-term installation and use, it must be cleaned and maintained to prolong its service life.
